IPv6

Starting from version OME v0.15.1, IPv6 is supported.

To use IPv6, you need to change the settings of the Server.xml file as follows:

1. Configuration for listening

You can use /Server/IP to support IPv6. In versions prior to v0.15.0, only one /Server/IP setting could be specified, but in versions after v0.15.1, multiple settings can be specified. That is, if you add an /Server/IP element for IPv6 to the existing configuration as follows, you can accept IPv6 requests from clients:

<Server>
...
	<IP>*</IP>
	<!-- Listening the bind ports on IPv6 interfaces -->
	<IP>::</IP>
...

* means 0.0.0.0(INADDR_ANY) in IPv4, and :: means ::0(in6addr_any) in IPv6.

Of course, you can also specify a specific IP address of an interface instead of ::.

Example 1) IPv4 Only

<Server version="8">
    <Name>OvenMediaEngine</Name>
    <Type>origin</Type>
    <IP>*</IP>

    <Bind>
        <Providers>
            <RTMP>
                <Port>1935</Port>
            </RTMP>
        </Providers>
    </Bind>
</Server>

OME listens to the 1935 port for RTMP as follows:

$ sudo netstat -tulnp | grep "$(pgrep OvenMediaEngine)"
tcp        0      0 0.0.0.0:1935            0.0.0.0:*               LISTEN      xxx/OvenMediaEn

Example 2) IPv6 Only

<Server version="8">
    <Name>OvenMediaEngine</Name>
    <Type>origin</Type>
    <IP>::</IP>

    <Bind>
        <Providers>
            <RTMP>
                <Port>1935</Port>
            </RTMP>
        </Providers>
    </Bind>
</Server>

OME listens to the 1935 port for RTMP as follows:

$ sudo netstat -tulnp | grep "$(pgrep OvenMediaEngine)"
tcp6       0      0 :::1935                 :::*                    LISTEN      xxx/OvenMediaEn

Example 3) IPv4 + IPv6

<?xml version="1.0" encoding="UTF-8"?>
<Server version="8">
    <Name>OvenMediaEngine</Name>
    <Type>origin</Type>
    <IP>*</IP>
    <IP>::</IP>

    <Bind>
        <Providers>
            <RTMP>
                <Port>1935</Port>
            </RTMP>
        </Providers>
    </Bind>
</Server>

OME listens to the 1935 port for RTMP as follows:

$ sudo netstat -tulnp | grep "$(pgrep OvenMediaEngine)"
tcp        0      0 0.0.0.0:1935            0.0.0.0:*               LISTEN      xxx/OvenMediaEn
tcp6       0      0 :::1935                 :::*                    LISTEN      xxx/OvenMediaEn

2. Configuration for IceCandidates (for WebRTC)

When you specify IPv6 interface /Server/IP, most Providers/Publishers will work with IPv6, but WebRTC will not. While the WebSocket server used as the WebRTC Signalling server works well with the above setting, but more setting is required for ICE Candidates that actually transmit/receive data.

To use IPv6 ICE Candidate, you need to add an IPv6 IceCandidate to /Server/Bind/(Providers|Publishers)/WebRTC/IceCandidates.

<Server version="8">
    ...
    <Bind>
        <Providers>
            <WebRTC>
                ...
                <IceCandidates>
                    <IceCandidate>*:10000/udp</IceCandidate>
                    <IceCandidate>[::]:10000/udp</IceCandidate>
                </IceCandidates>
...

To support IPv6 in URL format settings, use [::] instead of ::

The IceCandidate settings for Providers and Publishers are the same.

By setting up as above, OME is ready to use ICE Candidates for IPv6 as well as IPv4. The ICE Candidate generated here can be viewed in the signaling step of the web browser.

3. Configuration for <Origin>

Now you can set up the OME edge to look at an origin with an IPv6 IP address. To do this, you can set /Server/VirtualHosts/VirtualHost/Origins/Origin/Pass/Urls/Url as follows:

<Server version="8">
    ...
    <VirtualHosts>
        <VirtualHost>
            <Origins>
                <Origin>
                    <Location>/rtsp/stream</Location>
                    <Pass>
                        <Scheme>rtsp</Scheme>
                        <Urls>
                            <Url>airen:airen@[1:2:3:4:5:6:7:8]:1234/app/stream</Url>
                        </Urls>
                    </Pass>
                </Origin>
            </Origins>
  ...

This configuration creates a stream that refers an RTSP source provided on port 1234 of an origin which has an IPv6 address of 1:2:3:4:5:6:7:8.

4. Configuration for <AdmissionWebhooks>

You can also specify an IPv6 address for the server that AdmissionWebhooks is using. To do this, set the value of /Server/VirtualHosts/VirtualHost/AdmissionWebhooks/ControlServerUrl as follows:

<Server version="8">
    ...
    <VirtualHosts>
        <VirtualHost>
            <AdmissionWebhooks>
                <ControlServerUrl>http://[1:2:3:4:5:6:7:8]:7000/a/b/c</ControlServerUrl>

The above configuration asks whether the client has the permission to publish or playback using http://[1:2:3:4:5:6:7:8]:7000/a/b/c.

Last updated